Good Gaming PC Case

Good Gaming PC Case – The SilverStone RVZ-03 Mini

Another great SilverStone chassis called the RVZ-03 has just landed in New Zealand and we couldn’t resist opening it up to see what improvements they’ve made over the already excellent Raven series we’ve been loving since it’s original release back in 2014!

Starting off with the packaging this little chassis comes in a very sturdy black box which is easiest to open up from the large flat sides, rather than the top like regular sized cases we usually see. Once you’ve opened it up you’ll see a neatly foam packed chassis inside, enclosed within a scratch safe protective black bag.

Removing the outer protective packaging and opening every up reveals a massive assortment of goodies inside, all neatly arranged within clear bags. Amongst all this we’ve got all our essential screws, cable ties and brackets but also SilverStone have included 3x magnetic fan dust filters which are great to see, especially considering this small form-factor gaming chassis is very likely going to end up in the living room 🙂

Taking a closer look at the chassis itself we find an additional 2x 120mm low profile fans have been included with this case, both along the graphics card bay. These SilverStone LP fans are thin but extremely good at both moving air (1500rpm) and remaining pretty quiet (800rpm sweet spot) – which is quite the task for any small build like this as the CPU and GPU chambers can get pretty warm when you’re gaming – from our previous experience building in small chassis, the graphics card fans have to work quite hard and without adequate ventilation like this, they can get pretty darn hot!

Even though it’s really small the case is able to fit long graphics cards up to 33cm long, including aftermarket versions with various degrees of thickness still fitting (we’ll check just how fat you can go in our first build) and to hold these firmly in place you’ll find a four pack of 3M adhesive domes that can be positioned as needed to hold your chosen graphics card securely.

For the CPU bay we have space for cooling options up to 8.3cm tall, so if you’re thinking of grabbing a new Ryzen 3, the included Wraith Spire cooler is going to fit, Ryzen motherboard wise with the case having ITX form factor we recommend getting something like the GA-AB350N which also features WiFi onboard.  

When choosing a power supply for your build you’ll also need to ensure this fits within the 15cm caddy, something like the EVGA SuperNOVA 550w is perfect – going modular here will free up more space inside your build for better airflow.

The RVZ-03 Mini PC Case has two front USB 3.0 ports on the front of the case along with twin 3.5mm ports, for connecting a gaming headset, but this latest version now also sports a really nice looking RGB trim along the front which is connected to an included LSB01 RGB controller!

We can’t wait to show you our mini PC builds with this exciting new case (as I write this we’ve already begun building some cool GTX 1050Ti, GTX 1060 and GTX 1070 builds with a range of different power supplies) and will update this blog with pictures from each, but anyways – onto the best bit – Those talented engineers at SilverStone have created an exceptionally good chassis here, not only is this one of the best options for building a small Gaming PC, but they’ve improved upon their already excellent Raven mini series by allowing for that larger power supply to be fitted, often reducing the total system cost and providing more options to those wanting to build a PC that’s small. The RGB lighting is nice to see also (pun intended), even more so with such a nice controller included in the kit, combine that with the 3x 120mm fans included and the value of the chassis really shines – on that note we happily give this case our GGPC Recommends Award  – The SilverStone RVZ-03 is GOOD!

Good Gaming PC Case – Phanteks EVOLV SHIFT

Those talented techs at Phanteks have created a new addition to the now iconic EVOLV series with two new chassis joining the range, these latest offerings are known as the EVOLV SHIFT and they’re looking really good! All up there are four versions of these new chassis, with two colour options (the black Evolv Shift looks amazing) and two unique sizes available.

The superb craftsmanship of the Evolv Shift can be seen in every detail, although extremely compact compared to the mid sized chassis we often see, the Shift delivers a versatile space in which we can pack in plenty of powerful components –  and pack them in we did!

For our first build in the smaller Shift chassis, we grabbed the Gigabyte B250N ITX Pheonix motherboard which conveniently has wireless built in, a 2 x 8GB kit of G.Skill Trident Z and a little SFX power supply from Corsair. With the large windows running down both sides and providing such a nice view we opted to replace our intel stock cooler with the Phanteks TC12LS low profile cooler, having used this previously in our CM Pro 6 RGB Sync test build we yet again replaced the standard fan with a very nice RGB one to really light things up, graphics wise even the smallest version of this chassis can fit a full-length (35cm) card inside but it’s important to note that even though we absolutely love the massive Aorus 1080Ti its triple slot form factor was a just a little too large for this one 😛

Building with the Shift is easier than most small cases due to the way they’ve separated it into different areas, the top of the chassis is where you mount your motherboard and a PCIe extender then attaches to another space behind this where you will fit your graphics card – with the smaller Shift, if you go with a dual fan graphics card it can be fitted backplate facing either in or out, with the longer triple fan cards we found the best fit is backplate out – keep that in mind when choosing which card to build with 😛

This leaves a fairly large space in the lower compartment which lets the air flow in and upwards, you could easily fit a 120mm AiO liquid cooling kit in here if you wanted too. While the power supply has its own special output on the base of the build all your outputs from the motherboard and graphics card come out at the top of the case hidden beneath a push-to-release cover panel which serves as the primary airflow output vent, there is a little hole on the rear of this area that cables can be routed through.

You can check out our builds in the Phanteks EVOLV Shift this weekend at the TechXpo in Auckland, we’ll also update with lots of pictures of the builds from the event so keep your eyes on the GGPC PC Gaming Blog and our GGPC Instagram for the latest!

Good Gaming PC Case – The Segotep SG-K7 RGB!

Throughout 2016 we were treated to a range of outstanding new chassis as manufacturers embraced both tempered glass and RGB lighting in their chassis lineups 🙂 Of all these new cases though one has really stood out, from a manufacturer known as Segotep who also made our orignal GGPC Shaman chassis known as Warship. This new case is a massive leap ahead in quality and looks a lot like the InWin 805 but with slightly different front IO placement, a big PSU shield and comes pre-fitted with 4x 120mm RGB fans.

GGPC Segotep SGK7 BoxGood looks aside there are a lot of other things Segotep got right with the SGK7, firstly the way it’s all packaged up is excellent with a sturdy double box and no polystyrene to be found 🙂 The foam padding holds everything securely and both sides of all the glass panels (two sides and front) are shrink wrapped for extra protection. The RGB fans are fitted 3x in the front and 1x in the back and come pre-connected to an included hub so you can control the colours and effects easily via the front IO. It also contains a decent manual for new builders which we really appreciate, and even a cleaning cloth which is a must for any glass build as they do tend to become fingerprint magnets 😛

GGPC Segotep Custom Gaming PC BuildThere’s no better way to get to know a chassis than building a gaming PC in one so for this blog we designed one that’s using the new B250m motherboard from Gigabyte and fitted the new i5-7500 taking a little time to wrap the cable up on the included CPU cooler so it looks nice. Another good thing about the new motherboards is we get to use 2400MHz ram this time around – the previous 2133MHz limitations are removed giving us access to a much larger variety of kits at the faster speed which is great for us as we like to try out new parts whenever possible – the new G.Skill Trident RGB is coming in 2400MHz so we’re extremely happy about this little change up!

Putting it all together was a quick process and once we successfully did a little boot test I thought I’d spend a moment doing something with the Segotep SGK7 I haven’t really seen any other chassis do – adding a custom RGB name plate!

GGPC Segotep RGB Custom Name PlateTo do this you need to remove the front glass panel so you can access some screws, once those are out a little clear plastic panel (with the default Segotep sticker on it) can be removed. When we peeled off the sticker it left a little residue which we quickly cleaned off with some meths, using the old sticker as a sizing template I began hunting around for something the right size to use. We then simply printed GGPC on a piece of paper with black around it, the LED glow is powerful enough to shine through the paper but if you take a little time to cut out the name it really blasts through – just put your gamertag on the plastic backer and screw it back in you won’t need any glue etc – it’s that easy 🙂

We’ve not seen a chassis this good available for so little before especially in New Zealand and on that note, now that we’ve built a Good Gaming PC in this chassis we are happy to give it a well deserved recommendation to anyone looking for a top chassis at a great price – The Segotep SG-K7 is GOOD!

GGPC Segotep SGK7 Good Gaming Case