We’ve been treated to so many good chassis lately and today we’re looking specifically at a very reasonably priced computer case from those fine folks at Cooler Master – a white MasterBox 5 with a dark mirror front panel 🙂
Starting things off, this isn’t the first in the MasterBox 5 series and there are also options if you wanted to grab this one in black, or with mesh instead of tinting on the front – that’s really what Cooler Master has been all about lately as well, options!
This chassis provides a really good base to start just about any kind of build in, an included power supply shield will help keep things super tidy inside. There are mounting holes all over the place which allow for multiple positions when fitting storage devices, the movable hot swap HDD caddy has a clip hinge with the CM logo on each drive bay as well. This case is ready for various sizes of motherboard, from the tiny ITX though to large ATX like we’ve used below in our little AMD test system.
The chassis does include 2x black CM 120mm fans which are mounted in the front, with these fitted the mirror effect for the front panel is pretty good at reflecting whatever your PC is facing – this panel is actually a deep tint so if you decide to put LED fans into the position you’ll cancel out the mirror somewhat and a things will light up the front, you can check this out in our RGB MasterBox 5 build shown at the bottom of this blog 🙂 The top of the case provide quick access to dual USB 3.0 (which aren’t coloured blue, we like this) and also audio jacks with the power button having a white LED light behind it. The side window panel is massive so when it came time to add in the little extra lighting we mounted this on the front aiming backwards, that way if you’ve got the PC on your desk at eye-level you won’t have a blazing LED shining directly into your eyes 😛
Even though the chassis is inexpensive compared to others of similar looks and quality (it’s under $150 NZD at the time of writing this) it’s so tidy looking you really can put in the highest end components and things won’t be off balance. There is space for X99 motherboards and dual graphics card builds, you can rear mount your radiator or even front mount a 240mm liquid cooling kit in a push/pull configuration and it even fits the absolutely massive air cooling units like the MasterAir Maker 8 – crazy cool!
We like this chassis so much we’ve decided to use it for our own top selling build – the GGPC Hero GTX 1050 Gaming PC \o/ With this build being a part of our latest series of custom rigs you can tweak the components and the new visual tool will show you what your system design looks like as you choose/change components. You won’t need to be a hardware guru to design a system, we only provide options which are compatible with each other. The tool works by providing a range of fully functional base builds from which you can customise your system upwards, adding additional graphics power or digital storage depending on your needs. You’ll be happily swapping out components to get the perfect look with no worries 🙂
We’re looking forward to doing more Custom Gaming PC builds with this chassis, with such flexible mounting options and killer looks it’s hard not to love this case (or the others in the series) but among the current range this white dark mirror version is certainly a favourite of ours 🙂 On that note we happily give this fine Cooler Master chassis our GGPC recommends award – the MasterBox 5 Dark Mirror Case is GOOD!